Table of Contents
Advertisement
Connecting Hardware Devices
Removing a Memory Module
1
If the server is in operation, shut it down then remove the access cover. For detailed
instructions, read the
CAUTION: Removing a memory module while the server is on could cause damage
to the server or the memory module.
Memory modules can be seriously damaged by static electricity. Wear a wrist or
heel ground cable to discharge static electricity carried on your body. If such
equipment is not available, touch a grounded metal object to discharge static
electricity before working on sensitive electronic components.
Mixing dissimilar metals may cause memory failures resulting in data corruption.
Install DIMMs with gold-plated edge connectors in gold-plated sockets only.
2
Observe the safety and ESD precautions discussed earlier in this chapter.
3
Remove the server cover.
4
Gently push the plastic ejector lever out and down to eject a DIMM from its socket.
5
Hold the DIMM by its edges, being careful not to touch its components or gold edge
connectors. Carefully lift it away from the socket and store it in an antistatic package.
6
Repeat steps 4 and 5 to remove additional DIMMs as necessary.
7
Replace the server cover.
8
Connect all external cables and the power cord to the server.
9
Turn on the monitor and then the server.
Maintenance Overview
on page 50.
60
Memory Modules
Advertisement
Table of Contents
