Table of Contents
Advertisement
Hardware Diagnostics
c
Use the arrow keys to highlight the desired test.
d
Press the Tab key for further instructions.
❖
03. Finish BUZZER sound
Sounds a beep when the server finishes the Running Test.
Notes: The running test setup is not saved on the HW Diagnostics disk. If you rerun
the HW Diagnostics program, reselect your options.
Do not execute Running Test by selecting only the Cache test.
The 02. Keyboard Test needs keyboard input, which the test stops and waits for. If
you want tests to run without input or stops, do not select the 02. Keyboard Test.
When selected tests complete, the following results appear on the screen:
OK
No error has been detected.
Failed
An error has been detected or the test has been stopped by a
user.
NOTE: To check the error log, select 03. LOG UTILITIES from the main test menu.
If the test has been halted, the test results are not displayed.
133
02. Running Test
Advertisement
Table of Contents
