Table of Contents
Advertisement
Connecting Hardware Devices
Removing a Processor
1
Observe the safety and ESD precautions at the beginning of this chapter and the
additional cautions given here. If the processor has a fan heat sink, disconnect the
power wire from the connector on the server board.
2
As you work, place boards and processors on a grounded, static free surface or
conductive foam pad.
3
Unplug the heat sink fan.
4
Detach the heat sink clip and remove the heatsink from the processor.
5
Raise the socket locking lever and remove the processor.
6
Place the processor in a piece of conductive foam and store in an anti-static
package.
7
Replace the terminator.
Replacing the terminator
67
CPU Modules
Advertisement
Table of Contents
