Table of Contents
Advertisement
Software Installation
9
Restart your machine as instructed.
NOTE: It is necessary to reinstall Service Pack 6a when the installation is complete.
Intel Pro100NT Driver
1
Select Control Panel from Settings on the Windows Start button.
2
Double-click the Network icon.
3
Select the Adapters tab.
4
Select Intel 82559 Fast Ethernet LAN on Motherboard.
5
Click Remove.
6
When the Warning dialog displays, click Yes.
7
When the Setup dialog displays, click No.
8
Click Close, then click Yes to restart the system.
9
After restarting, repeat steps 1-3.
10
Click Add.
11
When the Select Network Adapter dialog displays, click the Have Disk... button.
12
When the Insert Disk dialog displays, type the path to the Intel Pro Adapter driver.
Substitute your CD-ROMs drive letter for Z: Z:\Software\Pro100\Pro100NT\
13
The Select OEM Option dialog should display with only one available driver. Select
Intel PRO Adapter and click OK.
14
The Intel Pro100 82559 driver should be listed in the Network properties. Close the
control panel.
15
Configure the network settings as required by your network environment.
16
Restart your machine when prompted.
NOTE: It is necessary to reinstall Service Pack 6a when the installation is complete.
Windows NT Server 4.0
148
Advertisement
Table of Contents
