Installing The Printer Controller Module For Pcl6 (Ga-1230) - Toshiba E-STUDIO190F Service Manual

8.2.

Installing the Printer Controller Module for PCL6 (GA-1230)

8.2.1. Contents
Qty.
1
1
2
1
1
1
Note:
1. The part number(s) may differ depending on the Destination.
2. Refer to the Parts List.
8.2.2. Installation
CAUTION!
Turn the Power Switch on the Rear Side of the machine to the OFF position, and then
unplug the AC Power Cord before beginning installation. (During a Lightning Storm, to
prevent electrocution disconnect the Telephone Line Cable first before unplugging the
AC Power Cord.)
Description
Hardware Key
Expansion F-ROM Board
PC Board Support
Software CD
License Agreement
Installation Instructions
PCL KEY
Includes Operator's Manual
(1) Remove the Rear Paper Tray Cover.
(2) Remove 1 Silver Screw.
(3) Remove the SD Card Cover.
Caution:
Remove the SD Memory Card if it was installed.
240
Remarks