Toshiba E-STUDIO190F Service Manual page 55

(17) Remove the Pressure Roller (1316).
(18) Remove 2 Screws (V1).
Caution:
Exercise caution not to bend the Fuser Lamp
Terminal.
(19) Remove the Halogen Lamp (1309).
Note:
Do not Touch the glass portion of the Fuser Lamp
with bare hands. Grease from finger prints will
shorten its life cycle, use isopropyl alcohol to clean
finger prints.
(20) Shift the Fuser Roller and remove the Left Heat
Roller Bushing (1306).
(21) Remove the Heat Roller (1305).
(22) Remove the Heat Roller Gear (1308) and the
Right Heat Roller Bushing (1307).
(23) Remove 3 Screws (U3).
(24) Remove 2 Thermostats (1304).
55