Installing The 2Nd Paper Feed Module (Kd-1030) - Toshiba e-studio191f Service Manual

7.2.

Installing the 2nd Paper Feed Module (KD-1030)

7.2.1. Contents
Visually check the condition and contents of the box for completeness, or for any shipping damage before
starting the installation.
Remove all tapes, and the packing materials used to secure the units during shipment.
After unpacking, dispose of the packing materials appropriately.
No. Qty.
1 1
2 2
3 1
4 1
5 2
6 4
7 4
8 2
9 1
1
Note:
Refer to the Parts Manual for Part Number(s), Packing, and Accessories in details.
7.2.2. Installation
CAUTION!
Unplug the AC Power Cord before beginning installation.
Description
2nd Paper Feed Module
Bracket F
Bracket R1
Bracket R2
Flat Clamp
Screw (M3 x 8)
Screw (M4 x 8)
Washer-head Screw
Installation Instructions
2
5
This document
3 4
6 7
8
(1) Remove 1 Screw, and the SD Card Cover.
(2) Remove 7 Screws.
(3) Remove the Rear Cover.
Caution:
Remove the SD Memory Card if it was installed.
197
DP-1910F
Remarks
9