Toshiba E-STUDIO190F Service Manual page 161

No. Parameter
090~ Not Used
091
092 Smoothing
093 ~ Not Used
094
095 Reduction Ratio
096 ~ Not Used
109
110 MAC Address
111 Not Used
112 Insert EMAIL TXT 1 = Off
113 ~ Not Used
114
115 Time Zone
116 Overwrite
Warning
117~ Not Used
121
122 LDAP
123 One Ring Sound
124 ~ Not Used
199
-
200 ~
299
Note 1: Continuous Polling (Station Mode)
This feature allows you to Store or Add documents into a Polled file in memory.
To enable the Continuous Polling feature set the Function Parameter No. 003 to "2:STN"
(Station).
Function Parameter Table
Selections
1 = Off
2 = On
(70-100)
2 = On
1 = Scroll
2 = Direct
1 = Yes
2 = No
1 = Off
2 = On
1 = Off
2 = On
Selects whether the smoothing function is available.
Selects Print Reduction Ratio(%).
Indicates the MAC Address.
Selects whether the Text Template (email message)
is programmable and added on all email sent in the
message body above the top line of text. (Up to 40
characters Programmed in the User Parameters.)
Note:
After enabling this feature, aside from entering
the text in the User Parameters, it also has to be
activated in each Auto Dial Number before it will
take effect. It does not work for Direct Dialed
Numbers.
Selects the setting method for Time Zone.
Scroll : Allows using "Scroll Keys" to scroll
through the Time Zone Table.
Direct : Allows you to input the Time Zone
directly, (*) key to be used as a switch
between +/-.
Selects whether the Overwrite Warning is included
on the Internet FAX Result Receipt when
programming the Auto Dialer via email.
Selects whether to use the LDAP Server. Special
characters used in the LDAP, may not be
recognized and display incorrectly.
When Function Parameter No. 45 "Ring Detect
Count" is set to 1 Ring, and this parameter is
enabled (On), the machine will only ring once out
loud, answering on the second ring count.
See Note 5
161
Function