Installing The G3 Communication Port Kit (Gd-1230) - Toshiba E-STUDIO190F Service Manual

8.4.

Installing the G3 Communication Port Kit (GD-1230)

8.4.1. Contents
Qty.
14
Note:
1. The part number(s) may differ depending on the Destination.
2. Refer to the Parts List.
8.4.2. Installation
CAUTION!
Turn the Power Switch on the Rear Side of the machine to the OFF position, and then
unplug the AC Power Cord before beginning installation. (During a Lightning Storm, to
prevent electrocution disconnect the Telephone Line Cable first before unplugging the
AC Power Cord.)
1 Fax Cover
1 G3B PCB Bracket
1 G3B PC Board
1 G3B Harness
1 Telephone Line Cable
1 G3 Line Label
Screw
1 Installation Instructions
Description
(1) Remove the Rear Paper Tray Cover.
(2) Remove 1 Silver Screw.
(3) Remove the SD Card Cover.
Caution:
Remove the SD Memory Card if it was installed.
245
Remarks