Installing The 2Nd Paper Feed Module (Kd-1021) - Toshiba E-STUDIO190F Service Manual

8.5.

Installing the 2nd Paper Feed Module (KD-1021)

8.5.1. Unpacking
Visually check the condition and contents of the box for completeness or any shipping damage
before installation.
Remove all filament tapes and the packing materials used to secure the Unit during shipment.
Qty.
1
1
1
2
8
2
1
Note:
1. The part number(s) may differ depending on the Destination.
2. Refer to the Parts List.
3. Seven(7) Screws are use and the rest is a spare.
8.5.2. Installation
CAUTION!
Turn the Power Switch on the Rear Side of the machine to the OFF position, and then
unplug the AC Power Cord before beginning installation. (During a Lightning Storm, to
prevent electrocution disconnect the Telephone Line Cable first before unplugging the
AC Power Cord.)
Description
2nd Paper Feed Module
Bracket R
Bracket L
Bracket
Silver Screw
Screw
Installation Instructions
See Note
(1) Remove the Rear Paper Tray Cover.
248
Remarks