When scanning two-sided originals, press [2-sided Original].
Select the type of two-sided original, and press [OK].
- Do not forget to set or cancel the Two-sided Original mode according to the type of originals.
Repeat this operation as necessary.
5 5 5 5
After the last original is scanned, press [Done].
After the last original is scanned, press [Done].
After the last original is scanned, press [Done].
After the last original is scanned, press [Done].
NOTE
• • • •
To cancel the setting, press [Special Features]
• • • •
To cancel all settings and return the machine to the Standard mode, press
2-46
2-46
Copying Separately-set Originals (Job Build)
2-46
2-46
→
[Job Build], in this order.
.
2 2 2 2