Canon iR3300 Copying Manual page 135

2 2 2 2
5 5 5 5
Select the desired memory key from among memory keys [M1] to [M9], and press Select the desired memory key from among memory keys [M1] to [M9], and press
Select the desired memory key from among memory keys [M1] to [M9], and press Select the desired memory key from among memory keys [M1] to [M9], and press
[Next]. [Next].
[Next]. [Next].
NOTE
• • • •
A mode memory key already storing copy settings shows a small, black square (
• • • •
If you select a memory key already storing copy settings, the settings are displayed.
• • • •
If there are more stored copy settings than are currently displayed, then you can scroll the list using [
If you select a memory key not already storing copy settings: If you select a memory key not already storing copy settings:
If you select a memory key not already storing copy settings: If you select a memory key not already storing copy settings:
l
Select [Yes] to store copy settings.
Select [No] to cancel storing.
When storing is completed, the message "Stored in memory." appears for about two seconds.
The memory key storing the copy settings is reversed and the stored settings are displayed.
Storing/Recalling Often-used Copy Settings in Memory (Mode Memory)
n
) in the lower right corner.
s t
] or [
2 2 2 2
].
2-49 2-49
2-49 2-49