Canon iR3300 Copying Manual page 140

4 4 4 4
Select a memory key to be erased, and press [Next]. Select a memory key to be erased, and press [Next]. Select a memory key to be erased, and press [Next]. Select a memory key to be erased, and press [Next].
The message appears to confirm that you want to erase the copy job.
IMPORTANT
• • • •
Check the copy settings before you erase them.
NOTE
• • • •
A mode memory key already storing copy settings shows a small, black square (
• • • •
If you selected a memory key already storing copy settings, the settings are displayed.
• • • •
If there are more stored copy settings than are currently displayed, then you can scroll the list using [
5 5 5 5
Press [Yes]. Press [Yes]. Press [Yes]. Press [Yes].
If you want to cancel erasing, press [No].
The message "Erased. appears for about two seconds on the touch panel display.
2-54 2-54 Storing/Recalling Often-used Copy Settings in Memory (Mode Memory)
2-54 2-54
n
) in the lower right corner.
s
] or [
2 2 2 2
t
].