Making One-Sided Copies From Two-Sided Originals (2 1-Sided) - Canon iR3300 Copying Manual

4 4 4 4
Press Press Press Press
When the original is placed on the platen glass, follow the instructions that appear in the screen and
press
Copying starts.
NOTE
To cancel the setting, press [Two-sided Mode] →[Cancel], in this order.
• • • •
• • • •
To cancel all settings and return the machine to the Standard mode, press
Making One-sided Copies from Two-sided Originals Making One-sided Copies from Two-sided Originals Making One-sided Copies from Two-sided Originals Making One-sided Copies from Two-sided Originals
(2 1-Sided) (2 1-Sided)
(2 1-Sided) (2 1-Sided)
This feature enables you to copy two-sided original onto one side of the paper.
Original Original
Original Original
IMPORTANT
• • • •
Be sure to horizontally a A4R or A5R landscape-oriented original. If you set it vertically and copy, the top sides of the
front and rear sides are copied in opposite directions.
NOTE
• • • •
To copy two-sided originals using the platen glass, use the Job Build mode of Special Features. (See 'Copying
Separately-set Originals (Job Build)', on p. 2-44.)
1-62 1-62 Two-sided Copying (Two-sided Mode)
1-62 1-62
. . . .
once for each original. When scanning is completed, press [Done].
.
Copy Copy
Copy Copy
1 1 1 1