Canon iR3300 Copying Manual page 131

2 2 2 2
1 1 1 1
Place your first original, and press [Special Features]. Place your first original, and press [Special Features]. Place your first original, and press [Special Features]. Place your first original, and press [Special Features].
2 2 2 2
Press [Job Build], and press [Done]. Press [Job Build], and press [Done]. Press [Job Build], and press [Done]. Press [Job Build], and press [Done].
The specified mode is set and the display returns to the Basic Features screen.
3 3 3 3
Press Press
Press Press
Scanning starts.
NOTE
• • • •
To cancel scanning, press [Cancel] or
4 4 4 4
When scanning is completed, place the next original, and press When scanning is completed, place the next original, and press When scanning is completed, place the next original, and press When scanning is completed, place the next original, and press
Change the scan settings before pressing
- You can adjust the exposure and the image quality. (See 'Adjusting Exposure and Image Quality', on
p. 1-22.)
- You can change the setting of the original type (i.e., One-sided/Two-sided). (See 'Two-sided Copying
(Two-sided Mode)', on p. 1-57.)
- You can change the number of copy sets. (See 'Entering the Copy Quantity', on p. 1-15.)
. .
. .
.
, if necessary.
Copying Separately-set Originals (Job Build)
. . . .
2-45 2-45
2-45 2-45
2 2 2 2