Canon iR3300 Copying Manual page 47

1 1 1 1
4 4 4 4
Press [XY Zoom]. Press [XY Zoom].
Press [XY Zoom]. Press [XY Zoom].
5 5 5 5
Enter each value for both the original and copy size, after pressing [X] (horizontal Enter each value for both the original and copy size, after pressing [X] (horizontal Enter each value for both the original and copy size, after pressing [X] (horizontal Enter each value for both the original and copy size, after pressing [X] (horizontal
direction) and [Y] (vertical direction). Then press [OK]. direction) and [Y] (vertical direction). Then press [OK]. direction) and [Y] (vertical direction). Then press [OK]. direction) and [Y] (vertical direction). Then press [OK].
When entering values in millimetres, you can use
clear your entries.
The display returns to the Basic Features screen, and the selected copy ratio is displayed.
If the copy ratio is less than 25%, a message appears telling you that the copy ratio will be adjusted to
25%. If it is more than 800%, a message appears telling you that the ratio will be adjusted to 800%.
NOTE
• • • •
When the ratio is larger than 400%, place the original on the platen glass.
• • • •
If you make a mistake when entering values, press [C ], and enter the correct value.
• • • •
To set the same values for the X and Y axes, press [Zoom].
• • • •
If you want to enter values in inches, press [Inch]. Set the inch entry function to [On] in the Additional Functions
beforehand. (See the Reference Guide.)
• • • •
For details of how to enter the values in inches, see the Reference Guide.
- (numeric keys) to enter numbers and
Changing the Copy Ratio (Copy Ratio)
1 1 1 1
to
1-39 1-39
1-39 1-39