1 1 1 1
l When you select [Staple], with the Saddle Finisher-G1 attached
When you select [Staple], with the Saddle Finisher-G1 attached
When you select [Staple], with the Saddle Finisher-G1 attached
When you select [Staple], with the Saddle Finisher-G1 attached
Press [Next] → select the type of staple ([Corner], [Double], or [Saddle Stitch]) → select the
staple position.
If [Saddle Stitch] is selected, follow the steps below.
- Press [Next].
- Select the paper size, and press [OK].
NOTE
• • • •
You can adjust the saddle stitch position. (See the Reference Guide.)
3 3 3 3
Press [OK].
Press [OK].
Press [OK].
Press [OK].
The specified mode is set and the display returns to the Basic Features screen.
Collating Copies (Finisher)
1 1 1 1
1-55
1-55
1-55
1-55