Technical Specifications; Homologations; Directives; Certifications - DeDietrich AWHP 4MR–EMC 24/28 MI HYBRIDE User Manual

3 Technical specifications

3 Technical specifications
3.1

Homologations

14

3.1.1 Directives

This product complies with the requirements of the following European Di­
rectives and Standards:
Low Voltage Directive 2006/95/EC
Generic standard: EN 60335–1
Relevant Standard: EN 60335-2-40
Electromagnetic Compatibility Directive 2004/108/EC
Generic standards: EN 61000-6-3, EN 61000-6-1
Relevant Standard: EN 55014
Pressure Equipment Directive 97/23/EC, Article 3, paragraph 3
This product conforms to the requirements of European Directive
2009/125/EC on the ecodesign of energy-related products.
In addition to the legal requirements and guidelines, the supplementary
guidelines in this manual must also be followed.
Supplements or subsequent regulations and guidelines that are valid at
the time of installation shall apply to all regulations and guidelines speci­
fied in this manual.

3.1.2 Certifications

Tab.3 Certifications
CE identification number
NOx class
Type of connection

3.1.3 Unit categories

Tab.4 Unit categories
Category Gas type
II G20 (H gas)
2H3B/P
G30/G31 (butane/propane)

3.1.4 Factory test

Before leaving the factory, each indoor module is tested on the following
items:
Tightness of the heating circuit
Electrical safety
Tightness of the refrigerant circuit
PIN 0063CM3019
5 (EN 15502–1)
Connection pressure
(mbar)
20
30
7611444 - v02 - 11122015