5 Operation
Fig.31
Displaying the sub-menu parameters
COUNTERS
5.2
Start-up
5.3
Shutdown
Fig.32
Selecting the shut-down mode
MW-5000027-3
Fig.33
Confirming the heating mode
30
3. Select the menu by pressing the
menu is displayed. Confirm the selection by pressing the
4. Go back to the main display by pressing the
MW-5000045-3
1. Switch on the outdoor unit and the indoor module simultaneously.
2. The heat pump begins its start-up cycle.
If the start-up cycle runs normally, an automatic venting cycle is initi
ated. Otherwise, an error message is displayed.
5.3.1 Switching off the heating
Note
Heating mode can be managed via the TIME PROG sub-menu
dedicated to timer programming.
1. Confirm the shut-down mode by pressing the
2. Select heating mode by pressing the
MW-5000133-2
key.
or
key until the desired sub-
key.
key.
key.
key. Confirm by pressing the
7611444 - v02 - 11122015