Pcb Parameters Scb-04; Counters / Time Prog / Clock Menus / Prog Cool - DeDietrich AWHP 4MR–EMC 24/28 MI HYBRIDE User Manual

Tab.22 List of parameters accessible to the user
Parameters
AP073
AP074
CP010
CP040
CP071
CP072
CP320
CP350
CP360
CP540
CP570
Tab.23 List of parameters
Parameters Description
AC001 Number of hours' operation
AC002 Number of hours' compressor operation since the last service hours
AC003 Number of hours' operation since the last service
AC004 Number of hours' compressor start-up since the last service
AC005 Consumption in heating mode
AC006 Consumption in domestic hot water mode
AC007 Consumption in cooling mode
AC008 Energy recovered in heating mode
AC009 Energy recovered in domestic hot water mode
7611444 - v02 - 11122015

6.1.4 PCB parameters SCB-04

Certain parameters are displayed:
Description
SUMMER / WINTER set point switch:
Can be set from 15 to 30°C
Set to 30.5°C = function deactivated
SUMMER override:
0 = OFF
1 = ON
Heating water flow temperature set point for the area heated
Can be set from 7 to 100°C.
Post-operation time of the generator pump
Can be set from 0 to 20 minutes
Room temperature set point in reduced mode
Can be set from 5 to 30°C.
Room temperature set point in comfort mode
Can be set from 5 to 30°C.
Circuit operating mode
0 = Timer program
1 = Manual
2 = Frost protection
Not available on this version
Not available on this version
Swimming pool water temperature set point
Can be set from 0 to 39°C
Set to 0: frost protection operation
Not available on this version

6.1.5 COUNTERS / TIME PROG / CLOCK menus / PROG COOL

This menu contains the following sub-menus:
according to certain system configurations,
according to the options, circuits or sensors actually connected.
COUNTERS
TIME PROG : timer program
CLOCK
PROG COOL
Sub-menu COUNTERS
Factory setting Customer setting
22°C
0
40°C
4 minutes
16°C
20°C
0
20°C
Unit PCB
EHC-02
hours x
x
hours x
hours x
kWh x
kWh x
kWh x
kWh x
kWh x
6 Settings
PCB
SBC-04
x
35