Scanning In Presentation Mode - Motorola LS3408-FZ20005 Product Reference Manual

Scanning in Presentation Mode

The optional IntelliStand adds greater flexibility to scanning operation. When you insert the scanner into the stand's
"cup," the scanner's built-in sensor places the scanner in presentation (hands-free) mode. When you remove the
scanner from the stand, it operates in its normal hand-held mode.
Scanner "Cup"
Inserting the Scanner in the IntelliStand
Figure 2-4
To operate the scanner in the IntelliStand:
Connect the scanner to the host (see the appropriate host chapter for information on host connections).
1.
Insert the scanner into the IntelliStand by placing the front of the scanner into the stand's "cup" (see
2.
2-4).
To scan a bar code, present the bar code and ensure the scan line crosses every bar and space of the symbol.
3.
Upon successful decode, the scanner beeps and the LED turns green. For more information on beeper and
4.
LED definitions, see
Adjust angle of
scanner "cup"
Adjust height of
IntelliStand
Table 2-1 and Table 2-2.
Scanning 2 - 5
Figure