3. User Defined (default)
Allows you to set each mode individually.
When this option is enabled, the "suspend mode" time is
HDD Power Down, which ranges from 1 min. to 15 min
Note: If ou select Min. or Max. Power Saving modes,
y
"Suspend Mode" value are both fixed.
HDD Power o
D wn
When enabled, the hard dis
inactivity. All other devices
Options: Disabled (default)、1 Min、2 Min、3 Min、4 Min、5 Min、
、12 Min、13 Min、14 Min、15Min
10 Min、11 Min
Suspend Mode
T
his item allows you to select the period of inactivity before the system is suspended or put into
suspend mode.
Options: Disabled(default)、1M
1Hour
Video Off Option
This field determines when to activate the video off feature for monitor powe
O
ptions: Suspend→Off (default), Always On.
Video Off Method
T
his option determines the manner in which the monitor goes blank.
Options:
V/H SYNC+Blank(default) This selection will cause the system to turn off the vertical and
Blank Screen
DPMS Support
Modem Use IRQ
This determines the modem's IRQ. Options: 3 (default)、4、5、7、9、10、11、NA.
k drive will power down after a certain configurable period of system
remain active.
in、2Min、4Min、6Min、8Min、10Min、20Min、30Min、40Min、
horizontal synchronization ports and write blanks to the video buffer.
This option only writes blanks to the video buffer.
Initial display power management signaling.
39
KM400A Series
configurable from 1 minute to 1 hour. The
. and includes a "disable"
option.
the "HDD Power Down" value and the
6 Min、7 Min、8 Min、9 Min、
r management.