Table of Contents
Advertisement
VGA
When set to "On", any event occurring at a VGA Port will awaken a system which had been
previously powered down. Options: OFF (default)、On.
LPT & COM
W
hen this option is set to On, any event occurring at a COM(serial)/LPT (printer) port will awaken a
system which has been suspended.
Options: LPT/COM (default)、COM、LPT、NONE
HDD & FDD
When set to "On", any event occurring on a hard drive a
th
e system which had been previously suspended. Options: ON、OFF (default)
PCI Master
When set to "On
", you need a LAN add-on card which supports the power on function. It should also
support the wake-up on LAN jumper. Options: OFF (default)、ON
PCI PME Wake Up
When you select "Enabled", a P
mode. Options: Disabled (default)、Enabled
R
ing Wake Up
This option allows you to awake
Option: Disabled (default)、Enabled
RTC Wake Up
When "Enabled
", you can se
the system from Suspend mode. Options: Enabled、Disabled (default)
Date (of Month)
You can choose which month the system will boot up.
Wake Up" is set to "Enabled"
R
esume Time (hh: mm: ss)
Y
ou can choose the hour, minute and second the system will boot up. This field is only configurable
w
hen "RTC Wake Up" is set to "Enabled"
ME signal from any PCI card will awaken the system from suspend
n the system upon receiving an incoming call to a modem device.
t the date and time at which the RTC (real-time clock) alarm awaken
41
KM400A Series
ctivity or a floppy drive activity will awaken
This field is on
ly conf
igurable when "RTC
s
Advertisement
Table of Contents
