Video Off Method; Video Off In Suspend; Suspend Type; Modem Use Irq - Albatron PM 845G Series User Manual

Video Off Method

This option determines the manner in which the monitor is goes blank.
Options:
V/H SYNC+Blank
This selection will cause the system to turn off the vertical and horizontal
synchronization ports and write blanks to the video buffer.
Blank Screen (default)
This option only writes blanks to the video buffer.
DPMS Support
Initial display power management signaling.

Video Off In Suspend

Set if the monitor will be on when the system suspend. Options: No (default), yes.

Suspend Type

The item allows you to select the suspend type under ACPI operating system.
Options: Stop grant (default), PWROn Suspend.

Modem Use IRQ

This determines the IRQ, which can be applied in MODEM use.
Options: NA, 3 (default), 4, 5, 7, 9, 10, 11.

Suspend Mode

The item allows you to select the suspend type under ACPI operating system.
Options: Disabled (default), 1 Min, 2 Min, 4 Min, 6 Min, 8 Min, 10 Min, 20 Min, 30
Min, 40 Min, 1 Hour.

HDD Power Down

This item allows you to adjust the time for HDD Off.
Options: Disabled (default), 1Min ~ 15Min.
Software-Off by PWR-BTTN
When you select Enabled, pressing the power button for more than 4 seconds forces the
system to enter the Soft-Off state when the system has "hung."
Options: Instant Off (default), Delay 4 Sec.
PM845G Series Mainboard
37