Table of Contents
Advertisement
Delete Array
1.
You can delete an existing array with the "Delete Array" option on the main screen. Choose
the "Delete Array" option and press <Enter>. Then press the <Enter> key once again and the
system will mark all the existing SATA devices with an asterisk (as shown below in the
bottom section). (Note that the example information below may differ slightly depending on
the RAID type you are configuring.)
2.
Press <Enter>. A
warning/con
confirm.
3.
After th
e array is successfully deleted, the screen will display as shown below.
firmation message will display (as shown below). Press <Y> to
57
KM400A Series
Advertisement
Table of Contents
