Installing The Max 4 Unit - Net2Phone MAX 4 User Manual

1.4 Installing the MAX 4 Unit

Install the unit in a well-ventilated area. If it is to be placed on a surface be sure that all four rubber feet
are in place to allow for proper air circulation. Do not place objects in excess of 20 pounds on top of the
unit.
Please refer to the Net2Phone MAX 4 Hardware Installation Guide and observe the safety
precautions listed.
Figure 1
Proceed with installation as follows:
1. Connect the analog telephones to the RJ-11 ports.
2. Connect the RJ-45 LAN port to a hub or switch.
3. If your installation includes a PBX, connect it as illustrated in Figure 1.
4. Plug the Net2Phone MAX 4 into your power outlet and turn the unit on.
Page 5