3. Logging in to the MAX Web Manager
Before you can log in to the MAX Web Manager, you need to know its current IP address. Refer to the
procedures in Section 2 to obtain its IP address via a telephone keypad or serial connection.
Reminder:
Ÿ If you want to query the unit from a telephone keypad, see section 2.1.1, Obtaining the MAX 4' s
DHCP IP Address via a Telephone Keypad.
Ÿ If you want to query the unit through a serial cable, see section 2.1.2, Connecting to the MAX 4
through a Serial Cable.
Once you know the Net2Phone MAX 4' s IP address, you are ready to log in to the unit through a Web
browser as follows:
1. Open a new browser window and enter the Net2Phone MAX 4' s IP address in the address box.
The MAX Web Manager Door page appears.
Figure 6
Page 15