Table of Contents
Advertisement
5.3.1
Voice Message File Download Procedure (For Win95/98/NT)
1. Power on the MAX 4 system and wait until the " OPR" LED begins to blink.
2. Obtain the MAX 4' s current IP address. (See Section 2.1.1 in this Guide.)
3. On your PC, open a DOS window or Command prompt.
4. Go to the PC directory to which you want to download the vocfile.
5. Establish an FTP connection with the MAX 4 as follows: from the DOS prompt, type ftp, a
space, and the IP Address of the unit followed by the Enter key. For example:
ftp 192.168.172.19 (Use your MAX 4' s IP address) followed by Enter Key
6. At the User <192.168.172.138 :<none>> prompt, enter the default Username, root
followed by the Enter key.
7. When prompted for a password, enter the default password, n2p, followed by the Enter key.
The password does not display on the screen as you type it.
8. At the FTP> prompt type get vocfile followed by the Enter key
You may now access the vocfile in the directory to which it was downloaded.
Figure 18, below, illustrates the FTP file download procedure.
Figure 18
Page 33
Advertisement
Table of Contents
