Step #8: Use Ssid With Radius Sever As Authenticator - D-Link DWC-2000 User Manual

Section 3 - Basic Configuration

Step #8: Use SSID with RADIUS Sever as Authenticator

To use SSID with RADIUS authentication, perform the following procedure.
1. Go to Security > External Auth Server > RADIUS Server.
2. Complete the fields below and click Save. Your access point will be configured to use RADIUS
authentication server.
3. Click Server Checking to test the connection between the DWC-2000 and your RADIUS server.
Field
Server Checking
Authentication Server
IP Address
Authentication Port
Secret
Timeout
Retries
D-Link DWC-2000 User Manual
Click to test the connection between the controller and your RADIUS server.
IP address of your RADIUS authentication server.
RADIUS authentication port number to send RADIUS messages.
Enter the secret key that allows the device to log into the configured RADIUS server. It must
match the secret on RADIUS server.
Set the timeout in seconds. The controller should wait for a response from the RADIUS server.
The number of tries the controller will make to the RADIUS server before giving up.
Description
45