D-Link DWC-2000 User Manual page 143

Section 5 - Advanced Network Configuration
Field
Route Name
Active
Private
Destination IP Address
IP Subnet Mask
Interface
Gateway IP Address
Metric
D-Link DWC-2000 User Manual
Enter a unique name for this static route. The name should allow you to easily identify
this static route from others you may add.
Activates or deactivates the status route. Choices are:
• ON = activate static route.
• OFF = deactivate static route.
Designates the static route as private. Choices are:
• ON = static route is private.
• OFF = static route is not private.
Enter the IP address of the static route's destination.
Enter the subnet mask of the static route.
Select the wireless controller interface that will interface to the static route. Choices are:
• LAN > VLAN: The wireless controller's LAN or VLAN port will interface to the static
route.
Enter the IP address of the gateway router, which is the next hop address for the wireless
controller.
Enter the administrative distance of the route.
Description
143