Basic Configuration Procedures - D-Link DWC-2000 User Manual

Section 3 - Basic Configuration

Basic Configuration Procedures

To perform common basic configuration procedures, follow the steps below:
• "Step #1: Enable DHCP Server (Optional)" on page 25
• "Step #2: Configure Country Code" on page 26
• "Step #3: Select APs to be Managed" on page 27
• "Step #4: Change the SSID and Set Up Security" on page 29
• "Step #5: Select MAC Authentication Mode" on page 34
• "Step #6: Confirm Access Point Profile is Associated" on page 36
• "Step #7: Configure Captive Portal Settings" on page 37
• "Step #8: Use SSID with RADIUS Sever as Authenticator" on page 45
• "Step #9: Configure Guest Management" on page 46
• "Step #10: Configure a BYOD Environment" on page 53
D-Link DWC-2000 User Manual 24