Step #4: Change The Ssid And Set Up Security - D-Link DWC-2000 User Manual

Section 3 - Basic Configuration

Step #4: Change the SSID and Set Up Security

You can configure up to 50 separate networks on the wireless controller and apply them across multiple radio
and virtual access point interfaces. By default, 16 networks are pre-configured and applied in order to the access
points on each radio. In this procedure, you will edit one of the pre-configured networks and change its SSID and
security settings to suit your requirements.
1. Click Wireless > Access Point > AP Profile > AP Profile SSID. The following page will appear with a list
of the wireless networks configured on the wireless controller.
2. Under the SSID Status column, select an SSID by right-clicking on it and clicking Edit. The following page
will appear.
D-Link DWC-2000 User Manual 29