D-Link DWC-2000 User Manual page 234

Section 7 - Viewing Status and Statistics
Blocked WDS Link Count
WDS Group Password Change Status
Edit Password
D-Link DWC-2000 User Manual
Number of WDS links blocked by the spanning tree protocol. If the AP on
one side of the link reports the link as blocking then the link is counted by
this status parameter.
Status of the last attempt to configure the password for the WDS Group:
• Not Started
• Success
• Invalid Password
• Requested
• Timed Out
To change the password for all controllers and APs in this WDS Group, select
the Edit checkbox, type the new password, and then click Apply Password.
Password must be minimum of 8 characters and can be up to 63 characters
in length.
234