Connecting The Wireless Controller - D-Link DWC-2000 User Manual

Section 2 - Installation

Connecting the Wireless Controller

To install the wireless controller, perform the following procedure:
1. Install the switch and access points according to the instructions in their documentation.
2. Connect one end of an Ethernet LAN cable to one of the ports labeled LAN (1-4) on the front of the
wireless controller. Connect the other end of the cable to an available RJ-45 port on a switch in the LAN
network segment.
3. Connect one of the wireless controller ports labeled LAN (1-4) to the network or directly to a PC.
4. Using the supplied power cord, connect the wireless controller to a working AC outlet.
5. The Power LED will illuminate orange during boot up. The LED will turn green once the wireless controller
has booted.
D-Link DWC-2000 User Manual 18