Configuring Ip Policies - D-Link DWC-2000 User Manual

Section 6 - Securing Your Network
Path: Security > Authentication > User Database > Groups
The following procedure describes how to configure IP-specific policies for user groups. Using this procedure,
you can allow or deny the users in a user group to log in to the wireless controllers' web management interface
from a particular network or IP address.
1. Click Security > Authentication > User Database > Groups.
2. Click the Add IP Policies button. The IP Policies Configuration page will appear.
3. Complete the fields in the table below and click Save. The address you defined will appear in the
Defined Addresses area.
Field
Group Name
Source Address Type
Network Address/IP Address
Mask Length
D-Link DWC-2000 User Manual

Configuring IP Policies

Select a group name from the drop-down menu.
Choices are:
• IP Address = specifies a particular IP address.
• IP Network = specifies an entire IP network.
Enter the network or IP address.
Enter a subnet mask.
Description
171