Configure Snmp Access Control List - D-Link DWC-2000 User Manual

Section 8 - Maintenance
1. Go to Maintenance > Management > SNMP > Access Control List tab.
2. Click Add Access Control.
3. Complete the information on fields (refer to the table below).
4. Click Save.
Field
IP Address
Subnet Mask
Community
Access Type
D-Link DWC-2000 User Manual

Configure SNMP Access Control List

The IP Address of the SNMP trap agent.
The network mask used to determine the list of allowed SNMP managers.
The community string to which the agent belongs.
Access will be either read only (ROcommunity) or read-write (RWcommunity).
Description
245