Using Diagnostic Tools On The Wireless Controller; Ping An Ip Address - D-Link DWC-2000 User Manual

Section 10 - Troubleshooting

Using Diagnostic Tools on the Wireless Controller

Path: Maintenance > Management > Diagnostics > Network Tools
As part of the diagnostics functions on the wireless controller, you can ping an IP address. You can use this
function to test connectivity between the wireless controller and another device on the network connected to
the wireless controller.
1. Go to Maintenance > Management > Diagnostics > Network Tools.
2. Under Command Output for Ping and Traceroute, in the IP Address / Domain Name field, enter an IP
address or domain name.
3. Click Ping. The results will appear in the Command Output display below.
D-Link DWC-2000 User Manual

Ping an IP Address

260