IMPORTANT
This change takes effect for all subsequent data and operations for the
printer as soon as the ↵ key is pressed and the asterisk (*) is displayed.
The configuration change(s) stay in effect only while the printer is
powered on. When the power is turned off, all current configurations will
be lost unless changes made to it are saved via the CONFIG. CONTROL
menu.
To save configuration information permanently or to select it as the power-up
default, see "Saving A Configuration" on page 90.
Changing Printer Settings
You can change (or "configure") printer settings, such as print speed or
emulations, through the control panel as follows:
1. Press the
2. Press the ↓ key to cycle through these options:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3. When the desired submenu displays, press the
through the values or options.
. .
key until the following message displays:
.
MENU MODE
QUICK SETUP
Print Intensity
Print Speed
Print Mode
Media Handling
Paper Feed Shift
Label Length
Label Width
Ver Image Shift
Hor Image Shift
Orientation
Gap/Mark Sensor
Auto Calibrate
Validator (if installed)
Active IGP Emul
Save Config.
Power-Up Config
SMT
Changing Printer Settings
or − key to scroll
+
89