IBM Infoprint 6700 Series User Manual page 121

Validator Funct.
This menu appears only if a validator is installed.
•
Enable. The printer will command the validator to begin scanning and
errors will be reported. The counters will be incremented while the
validator is enabled.
•
Disable.The printer will not command the validator to begin scanning and
no errors will be reported. The counters will not be incremented while the
validator is disabled.
NOTE: If you save a configuration with the validator enabled, then power
down and power up, and the validator is not connected or not
functioning, the error message "Validator not communicating" will
display briefly. The Validator menu will not display.
If the validator is installed, the default is Enable.
Save Config.
This option allows you to save up to eight unique configurations to meet
different print job requirements. This eliminates the need to change the
parameter settings for each new job. The configurations are stored in memory
and will not be lost if you turn off the printer. If the Protect Configs. parameter
is enabled, the new configuration will not be saved unless the existing
configuration has been deleted first. The factory default configuration cannot
be changed. See "Saving A Configuration" on page 90 for details.
The factory default is 1.
Power-Up Config.
You can specify any one of nine configurations (1-8 saved custom
configurations or Factory) as the power-up configuration.
The factory default is Factory.
SMT
This option enables the printer to make use of Software Migration Tools
(SMT) on RFID printers. There are SMTs for six separate end-use
applications supporting both PGL and PPI/ZGL datastreams with 64 bit and
96 bit tag options for a total of 24 tools. Each tool intercepts bar code data in a
host datastream and copies the data to an RFID tag (embedded in a smart
label) according to pre-defined rules. For more information, refer to the
Infoprint 6700 RFID Smart Label Printers RFID Labeling Reference Manual,
Form No. G550-0459.
The factory default is Disabled.
QUICK SETUP Submenus
121