Ecoprint (Selecting The Ecoprint Mode); File Name Entry (Entering A File Name) - Kyocera Ecosys P4040dn Operation Manual

EcoPrint (Selecting the EcoPrint mode)

Set EcoPrint mode. For details, refer to EcoPrint (Selecting the EcoPrint mode) on page 4-50.
Function:
Quiet Mode
01
Duplex
02
03 EcoPrint
EcoPrint:
* Off
01
02 On

File Name Entry (Entering a file name)

Enter the file name. The file name entered is displayed as the Job Name in the Job Status and Job Log.
Function:
Quiet Mode
01
Duplex
02
03 EcoPrint
File Name Entry:
doc
4
Press  or  to select the desired duplex printing mode.
The message display toggles through the following:
Off (default)
Bind Long Edge
Bind Short Edge
Selecting Off disables duplex printing.
5
Press [OK]. The duplex printing mode is set and the Function menu
reappears.
1
In the Copies menu or the Paper Source menu, press
[Function] ([Right Select]). The Function menu appears.
2
Press  or  to select EcoPrint.
3
Press [OK]. The EcoPrint screen appears.
4
Press  or  to select the EcoPrint mode.
5
Press [OK]. The EcoPrint mode is set and the Function menu
reappears.
1
In the Copies menu or the Paper Source menu, press
[Function] ([Right Select]). The Function menu appears.
2
Press  or  to select File Name Entry.
3
Press [OK]. The File Name Entry screen appears.
ABC
Text
4
Enter the file name using the numeric keys.
Note Up to 32 characters can be entered. For details on
entering characters, refer to Character Entry Method on page
A-2.
4-24
Operation Panel