Kyocera Ecosys P4040dn Operation Manual page 228

User 01
All Files
Data 01
Data 02
Print a File
Print the file(s) selected in the Job Box.
User 01
Print
01
02 Delete
ID:
0001
Copies:
(1 - 999,---)
Accepted.
4
Select
5
1
2
3
4
--- copies
5
Press [OK]. The printer displays a list of the jobs stored under the
selected user name.
Press  or  to select the name of the job to be printed.
When [Select] ([Right Select]) is pressed, the file is selected. A
checkmark will be placed on the right of the selected file.
Select the checkmarked file and press [Select] ([Right Select])
again to cancel the selection.
Note To select all files, follow the steps of Select/Deselect
All Files on page 5-23
In the file list screen, select the item and press [OK]. The Print/
Delete menu screen appears.
Press  or  to select Print and press [OK]. If the selected job was
saved as a Private Print job, its ID is displayed. If the job was saved
in stored job mode, the number of direct copies is displayed.
Use the numeric keys to enter the access code entered in the printer
driver.
Press [OK]. If the entered access code is correct, the Copies menu
screen appears.
If the entered access code is incorrect, the ID menu screen
reappears.
Note When the access code is set to the document
selected in the check box, Incorrect ID is displayed for
the disagreement.
To print 2 or more copies, use the numeric keys or press  or  to
set the number of copies to be printed.
After selecting the multiple copies in the printer driver, you can also
restore to "1" from the operation panel using the same method.
Note --- is displayed first, and it means it according to the
set number of copies when the data of each file is preserved.
In this setting, each set number of copies is printed.
Press [OK]. The message Accepted. appears and the printer prints
the selected job.
5-26
Document Box