Kyocera Ecosys P4040dn Operation Manual page 129

Protocol Detail (Detailed settings for the network protocol)
This selects the settings for Protocol Detail.
Item
NetBEUI
SNMPv3
FTP (Server)
SNMP
SMTP (E-mail TX)
POP3 (E-mail RX)
RAW Port
LPD
HTTP
LDAP
†
: The machine must be restarted after the setting is changed.
×: The machine does not need to be restarted after the setting is changed.
Use the procedure below.
Protocol Detail:
01 NetBEUI
SNMPv3
02
03 FTP(Server)
NetBEUI:
Off
01
* On
02
Description
Selects whether or not to receive
documents using NetBEUI.
Set SNMPv3.
Select whether or not to receive
documents using FTP.
Select whether or not to
communicate using SNMP.
Select whether or not to send e-
mail using SMTP.
Select whether or not to receive e-
mail using POP3.
Select whether or not to
communicate using RAW Port.
Select whether or not to receive
documents using LPD as the
network protocol.
Select whether or not to
communicate using HTTP.
Select whether or not to use LDAP. Off
1
In the TCP/IP Settings menu, press  or  to select Protocol
Detail.
2
Press [OK]. The Protocol Detail menu screen appears.
Exit
3
Press  or  to select the item for which you want to make settings.
4
Press [OK]. This displays the setting screen for the item selected in
step 3.
The screen shown is the one when NetBEUI is selected.
5
Press  or  to select On or Off.
6
Press [OK]. The Protocol Detail menu reappears.
Default Setting
On
Off
On
On
Off
Off
On
On
On
4-63
Operation Panel
†
Restarting the System
×



×
×



×