Kyocera Ecosys P4040dn Operation Manual page 188

Login User Name:
4000
Login Password:
User/Job Account:
01 User Login Set.
Job Account.Set.
02
Unknown ID Job
03
Job Account.Set.:
01 Job Accounting
AccountingAccess
02
03 Account.(Local)
Job Accounting (Enabling Job Accounting)
Enable job accounting. Use the procedure below.
Job Accounting:
01 * Off
On
02
AccountingAccess (Setting the job accounting access)
Set the job accounting access.
AccountingAccess:
01 * Local
Network
02
8
Enter the Login Password using the numeric keys then press [OK].
The login screen reappears.
Login
9
Pressing [Login] ([Right Select]). If the entered Login User Name
and Login Password are correct, the User/Job Account menu
screen appears.
Exit
10
Press  or  to select Job Account.Set..
11
Press [OK]. The Job Account.Set. menu appears.
Exit
1
In the Job Account.Set. menu, press  or  to select Job
Accounting.
2
Press [OK]. The Job Accounting screen appears.
3
Press  or  to select On or Off and then press [OK]. The Job
Account.Set. menu reappears.
1
In the Job Account.Set. menu, press  or  to select
AccountingAccess.
2
Press [OK]. The AccountingAccess screen appears.
3
Press  or  to select Local or Network, and press [OK]. The Job
Account.Set. menu reappears.
Note The initial setting for the administrator's Login
Password is "4000".
For details on entering characters, refer to Character Entry
Method on page A-2.
Note To select Network, network authentication must be
enabled and the server type must be set. For details, refer to
Netwk Auth. Set (Netwk authentication setting) on page 4-
112.
4-122
Operation Panel