Kyocera Ecosys P4040dn Operation Manual page 136

Hide thumbs Also See for Ecosys P4040dn:
Table of Contents

Advertisement

Netwk Authentic. (Network Authentication setting)
This sets the authentication method to be used when connecting to an access point.
Note You can also configure the network authentication setting for WPA-Enterprise and WPA2-Enterprise using
the web page of the optional Wireless Network Interface Kit (IB-51). For details, refer to the IB-51 User's Manual.
Netwk Authentic.:
01
*
Open
02
Shared
WPA-PSK
03
Encryption (Encryption settings)
This selects the encryption settings.
Note This setting is not displayed when the setting for Netwk Authentic. (Network Authentication setting) on page
4-70 is set to use an authentication method other than Open, Shared, WPA-PSK and WPA2-PSK, using Utility.
Encryption:
01
Data Encryption
02
WEP Key
Data Encryption (Data Encryption setting)
This sets the encryption method.
3
Enter the Channel number using the numeric keys,  or .
4
Press [OK]. The Custom Setup menu reappears.
1
In the Custom Setup menu, press  or  to select Netwk
Authentic..
2
Press [OK]. The Netwk Authentic. screen appears.
The available authentication methods are as follows:
Open
Shared
WPA-PSK
WPA2-PSK
3
Press  or  to select the desired authentication method.
4
Press [OK]. The Custom Setup menu reappears.
1
In the Custom Setup menu, press  or  to select Encryption.
2
Press [OK]. The Encryption screen appears.
The following operations are possible:
• Data Encryption (Data Encryption setting)...4-70
• WEP Key (WEP Key settings)...4-71
Exit
• Preshared Key (Preshared Key settings)...4-71
1
In the Encryption menu, press  or  to select Data
Encryption.
Note The Channel can be set between 1 and 11.
Note WPA-PSK and WPA2-PSK are only displayed when
Infrastructure has been set as the Connection Mode
(Switch between connection modes) on page 4-69.
Note WEP Key is displayed when Netwk Authentic.
(Network Authentication setting) on page 4-70 is set to Open
or Shared.
Preshared Key is displayed when Netwk Authentic.
(Network Authentication setting) on page 4-70 is set to WPA-
PSK or WPA2-PSK.
4-70
Operation Panel

Advertisement

Table of Contents
loading

Table of Contents