Kyocera Ecosys P4040dn Operation Manual page 141

Restart.
Are you sure?
Yes
Communication (Select the network interface to use)
The client function such as the network authentication and the reference of user information via LDAP operates only by the
selected interface. This function is mainly used for the network system administrator. For more information about each
function, refer to Command Center RX User Guide and IB-50/IB-51 User's Manual.
Communication:
01 * Standard NIC
Option NIC
02
2
Press [OK]. A confirmation screen appears.
No
3
Press [Yes] ([Left Select]). The message Restarting...
Please wait. appears and the network is restarted.
Pressing [No] ([Right Select]) returns to the Basic menu without
restarting the network.
1
In the Optional Network menu, press  or  to select
Communication.
2
Press [OK]. The Communication screen appears.
3
Press  or  to select the desired NIC.
Standard NIC: standard network interface of the printer
Option NIC: optional Network Interface Kit
4
Press [OK]. The NIC is set and the Optional Network menu
reappears.
4-75
Operation Panel