Setting The Paper Thickness - Kyocera Ecosys P4040dn Operation Manual

Media Type Set. (Paper type settings)
You can set the paper thickness by selecting a paper weight. This allows you to set the paper thickness for each of the media
types that can be used on the printer. And for custom paper registered in the printer (up to 8), you can specify paper
thickness and whether duplex printing is permitted. (For the procedure for registering custom paper sizes, refer to Custom
PaperSize (Setting a Custom Paper Size) on page 4-35.)
For normal settings, refer to Setting the Paper Thickness on page 4-37. For custom paper settings, refer to Custom Paper
Settings on page 4-38.
The options available in Media Type Set. menu are as follows:

• Setting the Paper Thickness...4-37

• Custom Paper Settings...4-38
Setting the Paper Thickness
You can set the paper thickness by selecting a paper weight.
The available paper weights are as follows:
• Extra Heavy
• Heavy 3
• Heavy 2
• Heavy 1
• Normal 3
• Normal 2
• Normal 1
• Light
Each media type's default weight is indicated.
Media Type
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Note Depending on the type of paper, the toner may not adhere to the paper properly. To solve this problem, select
the half speed mode from the printer driver. For more information, refer to Half Speed Mode (Printer Driver
Settings) on page 3-6.
Use the procedure below to set the paper weight.
(For the procedure for setting weights for custom paper (CUSTOM 1 to 8), refer to Custom Paper Settings on page 4-38.)
Paper Weight
Normal 2
Extra Heavy
Normal 2
Heavy 1
Normal 3
Normal 2
Light
Normal 3
1
In the Paper Settings menu, press  or  to select Media Type
Set..
Media Type
Letterhead
Color
Prepunched
Envelope
Cardstock
Thick
HighQuality
CUSTOM 1 to 8
4-37
Operation Panel
Paper Weight
Normal 3
Normal 3
Normal 2
Heavy 3
Heavy 3
Heavy 3
Normal 2
Normal 2