Kyocera Ecosys P4040dn Operation Manual page 54

Loading Paper into the MP (Multi-Purpose) Tray
The multi purpose tray will hold up to 100 sheets of A4 plain paper (80 g/m²) or up to 20 sheets of A3 plain paper (80 g/m²).
For details of the supported paper sizes, refer to Selecting the Right Paper on page A-18. For the paper type setting, refer
to Media Type (Paper type setting for the MP tray) on page 4-31.
IMPORTANT When using media types other than plain paper (such as recycled paper), always specify the media
type setting. If you are using a paper weight of 106 g/m² or more, set the media type to Thick and set the weight of
the paper you are using.
The capacity of the multi purpose tray is as follows.
• A4 plain paper (80 g/m²): 100 sheets
• A3 plain paper (80 g/m²): 20 sheets
• Hagaki: 1 sheet
• Envelope DL, Envelope C4, Envelope C5, Envelope #10, Envelope #9, Envelope #6, Envelope Monarch, Youkei 4,
Youkei 2: 5 sheets
• Thick paper: 5 sheets
Note When you load custom size paper, select Custom size by referring to Paper Size (Paper size setting for
the MP tray) on page 4-30 .
When you use special paper such as envelopes or thick paper, select the media type by referring to
(Paper type setting for the MP tray) on page 4-31 .
MP Tray
1
Fan the media (paper/transparencies), then tap it on a level surface
to avoid media jams or skewed printing.
2
Pull the MP tray towards you until it stops.
2-32
Preparation before Use
Media Type