Replacing The Waste Toner Box - Kyocera Ecosys P4040dn Operation Manual

Replacing the Waste Toner Box

Replace the waste toner box when the Waste toner box is full. message is displayed and when replacing the toner
container. A new waste toner box is included with the toner kit. The waste toner box needs to be replaced before the printer
will operate.
CAUTION Do not attempt to incinerate the Toner Container. Dangerous sparks may cause burns.
Left Cover
Lock Lever
New Waste
Toner Box
1
Open the left cover.
2
While holding the waste toner box, press the lock lever and then
gently remove the waste toner box.
3
Close the cap to the old waste toner box after removing the box from
the printer.
4
To prevent toner from spilling, put the old waste toner box in the
Cap
plastic bag (contained in the toner kit) and discard it later according
to the local code or regulations for waste disposal.
Old Waste
Toner Box
Plastic Bag
5
Open the cap of the new waste toner box.
Cap
Note Remove the waste toner box as gently as possible so
as not to scatter the toner inside. Do not let the opening of the
waste toner box face downward.
7-7
Maintenance