Kyocera Ecosys P4040dn Operation Manual page 79

1 Firmware Version
This item shows the version and release date of the printer
firmware.
2 Printer Settings Information
This item shows various printer settings for hardware-related
items:
- MP tray paper size and type
- Paper cassette size and type
- Copies
- EcoPrint
- KIR mode
- Resolution
- Sleep level
- Sleep time
- Power off time
- Form feed timeout time
- MP tray empty
3 Installed Options
This item shows the options installed in the printer:
- Paper Feeder
- SD card
- SSD
- Card Authentication Kit(B)
- Data Security Kit(E)
- UG-33
4 Network Status
This item shows the IP address, subnet mask address, and
default gateway address for the network interface card in the
printer.
5 Interface Information
This information shows the block status for items including the
USB memory slot and USB interface. When connected by
network interface card (NIC), block status is shown for an
optional interface.
6 Memory
This item shows:
- Standard memory in the printer
- Option memory slot status in megabytes
- Total memory in the printer
- Current status of the RAM disk
7 Emulation
This item shows all available emulations of the printer. The
PCL 6 emulation is set as the default when the printer is shipped
from the factory. The emulations are:
- PCL 6
- KPDL
- Line Printer
- IBM Proprinter
- EPSON LQ-850
4-13
Operation Panel