Table of Contents
Advertisement
9300 Mobile Computer
CHARGING THE BATTERY
You can use a cradle or charger to charge the Mobile Computer and/or its battery. Below
are the 4-Slot Battery Charger and 4-Slot Charging Cradle for 9300. The 4-Slot Battery
Charger can be mounted on table or wall. Drill two holes (centers spaced 105 millimeters
apart), secure the two supplied screws, and mount the charger by sliding over screws.
Warning:
It is recommended that the charging devices be operated at room
temperature (18°C to 25°C) for optimal performance. The charging devices
will not charge the battery when the temperature exceeds 40°C.
1) Seat batteries with contacts facing to back in the 4-Slo Battery Charger (top), or seat
the mobile computers in the 4-Slot Charging Cradle (bottom).
2) Connect the power supply cord to the power receptacle on the charger or cradle.
3) Connect the other end of the power cord to a suitable power outlet.
4) Press the power switch on, and the charger's LED or the Power LED on the cradle will
be blue.
5) For the 4-Slot Battery Charger, the LED will be red while charging, and will be green
when fully charged.
For the 4-Slot Charging Cradle, the LED on each of the mobile computers will be red
while charging, and will be green when fully charged.
Figure 3: 4-Slot Battery Charger
4
Reference Manual
Advertisement
Table of Contents
